S2000 AP1/AP2 Spec-A Full Aero
Honda S2000 AP1/AP2 ASM Style Spec-A Aero Kit
Fill in description here
Gallery
Item Number
S2000-FB-A
Description
S2000 Spec-A Front Aero Bumper, 8 lbs
Gallery
Item Number
S2000-FL-A
Description
S2000 Spec-A Front Lip
Will only work with ASM/Spec-A front bumpers.Gallery
Item Number
S2000-RB-A
Description
S2000 Spec-A Rear Aero Bumper
Bumper only comes with the single exhaust exit. Comes with high quality black powder coated aluminum mesh grille. Requires removal of brackets located on the passenger and driver’s side. Brackets are located right below the rear quarter panels. The rear bumper has built in mounts and no longer requires the use of those brackets. If brackets are not removed, the rear bumper will protrude outward.Gallery
Item Number
S2000-FFND-A
Description
S2000 Spec-A 25mm Wide Front Fenders
These fenders are produced with an FRP outer construction for easy sanding and painting and further reinforced with structural grade carbon fiber for added strength.Price
Gallery
Item Number
S2000-FFNDL-S
Description
Spec-S Rear Headlight Cover Liners
Running wide front fenders usually requires the removal of your OEM fender liners leaving certain areas exposed to dirt, water, and other debris. These covers install behind the headlights to protect the headlights and electrical harnesses from debris. *Will also work with OEM Front Fenders.Gallery
Item Number
S2000-RFND-A
Description
S2000 Spec-A Rear Fender Flare
FRP, Carbon, and Carbon-Kevlar versions are reinforced with an extra layer of carbon fiber for superior strength along with a cleaner looking backside finish. The extra carbon fiber backside reinforcement maintains a black finish unlike parts reinforced with fiberglass mat or fiberglass cloth, which tend to have a scuffy white finish.Gallery
Item Number
S2000-RFNDE-A
Description
S2000 Spec-A Rear Fender Extensions
This item was designed to be molded (not just riveted) onto your bumper of choice. Does not work well with an OEM AP2 rear bumper. FRP version is reinforced with an extra layer of carbon fiber for superior strength along with a cleaner looking backside finish. The extra carbon fiber backside reinforcement maintains a black finish unlike parts reinforced with fiberglass mat or fiberglass cloth, which tend to have a scuffy white finish.Gallery
Item Number
S2000-H-A
Description
S2000 Spec-A Vented Hood
FRP version comes reinforced with carbon fiber for added strength and improved underside aesthetic appeal. Comes built-in with a professionally-made, custom, 304 staineless steel latch striker. Our latch striker is a 304 stainless steel rod machine-bent and welded onto a 304 stainless steel plate (similar to an OEM or authentic Mugen hood). This ensures a high strength and rust-free latch striker greatly minimizing chance of failure compared to jimmy-rigged strikers from other brands. The rod diameter is made to OEM spec for silky smooth latching and delatching. All other built-in fasteners and installation hardware provided are also stainless steel. FRP version will come with an FRP vent cover.